Introduction To The Manufacturing Process Of Screw Barrel

Have you ever wondered how is the screw barrel manufactured? Today, I will take you to understand the processing process of screw barrel, let us explore this mysterious world together!

First of all, we need to know that the manufacture of screw barrel needs to go through several steps. According to different requirements and specifications, the specific process may be slightly different. But in general, they all include the following steps:

1）Tempering correction: This is to ensure that the material and hardness of the screw barrel meet the requirements.

2）Blank cutting: Put the required blank into the machine tool, ready for processing.

3）Rough turning: preliminary cut blank to make it close to the desired shape.

4）Drilling and tapping: drilling and tapping the screw barrel to install other parts.

5）Coarse taper: Further processing the taper of the screw barrel to make it more accurate.

6）Alloying groove: Pull out the alloying groove on the screw barrel to increase wear resistance.

7）Polishing: the surface of the screw cylinder is smooth to improve its beauty.

8）Milling screw: The screw is processed to ensure that its shape and size meet the requirements.

9）Spray welding alloy: spray welding alloy on the surface of the screw barrel to improve its wear resistance and service life.

10）Rough polishing: preliminary polishing of the screw barrel surface to make it more smooth.

The above is the processing process of the screw barrel, each step is very important, and the lack of any step may lead to the normal use of the screw barrel.

After reading this article, I believe you have a more in-depth understanding of the processing process of the screw barrel. If you are interested in this topic, please share your thoughts and questions in the comments section. Let’s study together and make progress together! Thanks for reading!