Small Experimental Extruder

Small experimental extruder is a plastic extruder designed for laboratory or small production environment. It uses single screw or twin screw design, can extrude a variety of plastic raw materials, such as PE, PP, ABS, PVC and so on. The following is an example of a small experimental extruder manufactured by our company.

Equipment name: Small experimental extruder

Equipment model: Φ25-20

Equipment origin: Zhoushan, Zhejiang

Applicable raw materials: PE, PP, ABS, PVC, etc

Equipment features:

1,Single screw extruder design, suitable for all kinds of plastic raw materials extrusion processing. Screw barrel adopts high quality 38CrMoAlA, surface nitriding treatment, nitriding depth 0.3-0.6mm. Number of screws 6 pieces.

2)Length-diameter ratio L/D=20:1 screw diameter and slow rotation can ensure that the material is fully mixed and evenly extruded.

3)The barrel is heated by cast aluminum, with heating power of 2KW/ zone in 3 zones, cooling in 2 zones, reserved for heating in 1 zone, and cooling by fan with cooling power of 60KW*2.

4)The main motor adopts frequency control motor, the motor power is 2.2KW, and the frequency control can realize stepless speed control, making the extrusion speed more flexible.

5)Domestic high-quality hard gear reducer, strengthen the box structure, reducer long service life, low noise, high torque.

6)Small size and compact design, easy to move and transport.

7)Molds of different specifications can be selected to adapt to different types and scales of plastic extrusion processing.

8)Easy maintenance, safe and reliable operation.

Technical parameters:

1,Power supply: 220V/380V, 50Hz

2,Host power: about 1.5kW

3,Maximum extrusion pressure: about 150kg/cm²

4,Maximum extrusion rate: about 5kg/h

5,Overall dimensions (length x width x height) : about 600x400x1300mm

6,Machine weight: about 800kg

Note:

①Please read this manual carefully before use, and understand the safety regulations that operators must comply with.

②Follow the specified steps to ensure that the device is properly connected to the power and air sources.

③Check whether the power supply, air supply, heating system and control system of the device work normally before starting the device each time.

④Ensure that the equipment and the surrounding environment are clean and maintained during operation.

⑤If any abnormal situation is found during the operation, please stop the machine immediately for inspection and report to the relevant personnel.

⑥This device is only for professional use, non-professional personnel do not attempt to operate.

⑦Do not touch hot parts during use to avoid burns.