

The screw of a sugar extruder is a key component in candy production. Its operating principle and design are similar to those of a plastic extruder, but it is optimized for the characteristics of food ingredients such as sugar paste. The following are key technical details:
Feed Section: Sugar paste enters the screw feed section through a metered injection system and is conveyed forward by the screw’s screw threads.
Compression and Plasticization: The screw’s rotation generates shear forces, uniformly plasticizing the sugar paste under high pressure while removing entrained air.
Forming Section: The molten sugar paste is extruded through the die head, cooled and shaped, and then demolded to form a continuous product (such as bonbons or tubes).
Screw Design: A single screw is typically used, divided into a feed section, a compression section, and a homogenizing section. The screw pitch and flute depth are adjusted according to the viscosity of the sugar paste.
Die Adaptation: The die head is equipped with a bell-shaped die hole for easy demolding and consistent product specifications. Temperature Control System: External heating and cooling systems precisely control the temperature of the massecuite to prevent burning or over-softening.
Efficient and Continuous Production: Compared to traditional processes, extrusion technology shortens the process and improves raw material utilization, making it suitable for large-scale candy production.
Product Diversity: Can produce a variety of candies, including puffed, filled, and multi-layered ones, such as ready-to-eat cereals or decorative syrups.
Cleaning Requirements: The screw must be regularly disassembled to remove residual massecuite and prevent microbial growth.
Wear Inspection: Use a micrometer to measure the dimensions of the threaded components and promptly replace any cracked or severely worn parts.
Note: Food-grade screws must meet hygienic standards and are typically made of stainless steel or a wear-resistant alloy with a polished surface to reduce massecuite adhesion.
หมวดหมู่สินค้า:
กระบอกสกรูอัดแผ่น | กระบอกสกรูอัดรีดฟิล์มเป่า | กระบอกสกรูอัดขึ้นรูปแบบเป่า | กระบอกสกรูอัดเม็ดรีไซเคิล |
สกรูอัดลวดและสายเคเบิล | กระบอกสกรูอัดรีดแผ่นเหล็กพลาสติก | กระบอกสกรูอัดรีดแบบดึงลวด | กระบอกสกรูอัดรีดเคลือบฟิล์ม |
ท่อสกรูอัดรีดฟิล์มหล่อ | กระบอกสกรูอัดรีดแผ่น | กระบอกสกรูอัดรีดแบบหมุน | ท่อสกรูคู่ทรงกรวย |
กระบอกสกรูคู่ขนาน | กระบอกสกรูเครื่องฉีดพลาสติก | ท่อสกรูอัดอาหาร | กระบอกสกรูอัดสารเคมี |
กระบอกสูบสกรูที่ไม่ได้มาตรฐาน | เครื่องอัดรีดแบบปรับแต่งได้ | ||
หากผลิตภัณฑ์สกรูบางตัวไม่มีรายการ โปรดติดต่อเราทางอีเมล และเราจะตอบกลับภายใน 24 ชั่วโมง!
เราสามารถเข้าถึงประเทศและภูมิภาคต่างๆ ได้อย่างรวดเร็ว ทั้งทางเรือ ทางอากาศ การจัดส่งด่วนระหว่างประเทศ และวิธีการขนส่งอื่นๆ เรามีสต็อกสกรูและบาร์เรลขนาดมาตรฐาน และเมื่อลูกค้ายืนยันการสั่งซื้อแล้ว จะสามารถจัดส่งได้ภายใน 5-7 วัน
เรามีวิศวกรผู้เชี่ยวชาญมากมายที่สามารถปรับแต่งกระบอกสกรูหลากหลายประเภทได้อย่างรวดเร็วตามความต้องการของลูกค้า ก่อนการผลิต ฝ่ายเทคนิคจะตรวจสอบทุกรายละเอียดกับพนักงานขายตามความต้องการของลูกค้า ระหว่างการผลิต ทุกขั้นตอนจะได้รับการตรวจสอบก่อนดำเนินการขั้นตอนต่อไป และพนักงานขายทุกคนจะติดตามผลเพื่อให้แน่ใจว่า 100% ถูกต้อง ลดข้อผิดพลาดในการสื่อสารและความล่าช้าในการทำงาน เราให้ความสำคัญกับคุณภาพระดับสูงและราคาอยู่ในระดับกลาง
ทีมขายของเรามีความคุ้นเคยกับกระบวนการผลิตและการส่งออกเป็นอย่างดี และมีประสบการณ์ด้านการบริการลูกค้ามากว่า 10 ปี พนักงานขายทุกคนมั่นใจได้ว่าข้อกำหนดของลูกค้าและกระบอกสกรูของเรามีความถูกต้องแม่นยำ 100% ในรายละเอียดการผลิต เราจะแก้ไขปัญหาด้านการขนส่งสินค้าจนกว่าลูกค้าจะพึงพอใจ