Quét mã WeChat để liên hệ với chúng tôi
Biểu mẫu liên hệ

PET,PP strapping (plastic-steel strapping) screw

THÔNG SỐ SẢN PHẨM

  • Application:PET/PP strapping production line
  • Nơi xuất xứ: Chiết Giang, Trung Quốc
  • Tên thương hiệu: JED
  • Thông số kỹ thuật: Φ 35mm~ Φ 160mm
  • Vật liệu: 38CrMoAlA
  • Quy trình: thấm nitơ và lưỡng kim
  • Độ cứng nitơ hóa: HV900-HV1000
  • Độ sâu vỏ thấm nitơ: 0,45-0,8mm
  • Độ giòn thấm nitơ: Thấp hơn cấp 2
  • Độ nhám bề mặt: Ra 0.4
  • Độ thẳng của vít: R0.015mm
  • Tỷ lệ đường kính chiều dài:1: (24-33)
  • kim loại kép: lớp hợp kim 2-2.5
Sự miêu tả
Câu hỏi thường gặp
Yêu cầu báo giá

Sự miêu tả

The screw design of a PET/PP strapping production line directly impacts the plasticizing effect and product quality. Key features and technical points are outlined below:

1.Screw Parameters and Structural Design

  • For PET raw materials, a screw design with an adjustable aspect ratio and structure is used to accommodate the processing requirements of different raw materials (such as waste PET bottle flakes), ensuring uniform plasticizing and low energy consumption. A vented screw can also be used.
  • For PP raw materials, the screw can be designed as a BM type with a barrier structure, depending on the raw material, ensuring uniform plasticizing and low energy consumption. A vented screw can also be used.
  • Some equipment addresses insufficient plasticizing by optimizing the screw combination, such as adjusting temperature or speed to increase barrel fill and stabilize die pressure.
  • JED has extensive experience in screw and barrel production for strapping (plastic-steel strapping) and has received praise from numerous domestic and international customers.

2.Stretching System Integration

  • Some production lines incorporate PET/PP film stretching concepts into the screw rear section design, combining infrared heating and stretching rollers to achieve more uniform stretching and enhance strapping toughness.

3. Common Problems and Solutions

  • Feeding Blockage: This may be caused by raw material agglomeration or excessive lubricant. Check the feeding system and adjust the formulation.
  • Poor Plasticization: This can be corrected by increasing the temperature, replacing the die, or optimizing the screw assembly.

4.Intelligent Control

  • The advanced production line is equipped with a PLC intelligent control system that monitors melt temperature, pressure, and other parameters in real time to ensure stable screw operation.

Câu hỏi thường gặp

YÊU CẦU BÁO GIÁ

YÊU CẦU BÁO GIÁ